|
|
Line 1: |
Line 1: |
| = Contents =
| | What do I put here? |
| | |
| '''[[Introduction]]'''
| |
| | |
| <p><strong>Data Collection</strong></p>
| |
| | |
| <p>1. Data collection – geological</p>
| |
| | |
| <p style="margin-left: 40px;">1.1.1 Structural model – basic</p>
| |
| | |
| <p style="margin-left: 40px;">1.1.2 Structural model – advanced</p>
| |
| | |
| <p style="margin-left: 40px;">1.2.1 Lithology domains – basic</p>
| |
| | |
| <p style="margin-left: 40px;">1.2.2 Lithology domains – advanced</p>
| |
| | |
| <p>2. Data collection – mining</p>
| |
| | |
| <p style="margin-left: 40px;">2.1.1 Production blasting database – basic</p>
| |
| | |
| <p style="margin-left: 40px;">2.1.2 Production blasting database – advanced</p>
| |
| | |
| <p style="margin-left: 40px;">2.2.1 Development blasting database – basic</p>
| |
| | |
| <p style="margin-left: 40px;">2.2.2 Development blasting database – advanced</p>
| |
| | |
| <p style="margin-left: 40px;">2.3.1 Ore extraction database – basic</p>
| |
| | |
| <p style="margin-left: 40px;">2.3.2 Ore extraction database – advanced</p>
| |
| | |
| <p style="margin-left: 40px;">2.4.1 Stope geometry – basic</p>
| |
| | |
| <p style="margin-left: 40px;">2.4.2 Stope geometry – advanced</p>
| |
| | |
| <p style="margin-left: 40px;">2.5.1 Cave geometry – basic</p>
| |
| | |
| <p style="margin-left: 40px;">2.5.2 Cave geometry – advanced</p>
| |
| | |
| <p>3. Data collection – geotechnical</p>
| |
| | |
| <p style="margin-left: 40px;">3.1.1 Rock properties – basic</p>
| |
| | |
| <p style="margin-left: 40px;">3.1.2 Rock properties – advanced</p>
| |
| | |
| <p style="margin-left: 40px;">3.2.1 Stress properties – basic</p>
| |
| | |
| <p style="margin-left: 40px;">3.2.2 Stress properties – advanced</p>
| |
| | |
| <p style="margin-left: 40px;">3.3.1 Deformation/damage monitoring – basic</p>
| |
| | |
| <p style="margin-left: 40px;">3.3.2 Deformation/damage monitoring – advanced</p>
| |
| | |
| <p style="margin-left: 40px;">3.4.1 Ground support capacity – basic</p>
| |
| | |
| <p style="margin-left: 40px;">3.4.2 Ground support capacity – advanced</p>
| |
| | |
| <p>4. Data collection – seismic</p>
| |
| | |
| <p style="margin-left: 40px;">4.1.1 Seismic event location – basic</p>
| |
| | |
| <p style="margin-left: 40px;">4.1.2 Seismic event location – advanced</p>
| |
| | |
| <p style="margin-left: 40px;">4.2.1 Magnitude range – basic</p>
| |
| | |
| <p style="margin-left: 40px;">4.2.2 Magnitude range – advanced</p>
| |
| | |
| <p style="margin-left: 40px;">4.3.1 System status – basic</p>
| |
| | |
| <p style="margin-left: 40px;">4.3.2 System status – advanced</p>
| |
| | |
| <p style="margin-left: 40px;">4.4.1 QA/QC – basic</p>
| |
| | |
| <p style="margin-left: 40px;">4.4.2 QA/QC – advanced</p>
| |
| | |
| <p>4.5. Regional and national seismic network</p>
| |
| | |
| <p style="margin-left: 40px;">4.5.1 Regional and national seismic network – basic</p>
| |
| | |
| <p style="margin-left: 40px;">4.5.2 Regional and national seismic network – advanced</p>
| |
| | |
| <p><strong>Seismic Response to Mining</strong></p>
| |
| | |
| <p>5. Seismic response to mining – numerical models</p>
| |
| | |
| <p style="margin-left: 40px;">5.1.1 Comparative modelling – basic</p>
| |
| | |
| <p style="margin-left: 40px;">5.1.2 Comparative modelling – advanced</p>
| |
| | |
| <p style="margin-left: 40px;">5.2.1 Back analysis – basic</p>
| |
| | |
| <p style="margin-left: 40px;">5.2.2 Back analysis – advanced</p>
| |
| | |
| <p style="margin-left: 40px;">5.3.1 Forecast modelling – basic</p>
| |
| | |
| <p style="margin-left: 40px;">5.3.2 Forecast modelling – advanced</p>
| |
| | |
| <p>6. Seismic response to mining – seismic analysis</p>
| |
| | |
| <p style="margin-left: 40px;">6.1.1 Short term seismic hazard assesment – basic</p>
| |
| | |
| <p style="margin-left: 40px;">6.1.2 Short term seismic hazard assesment – advanced</p>
| |
| | |
| <p style="margin-left: 40px;">6.2.1 Re-entry analysis – basic</p>
| |
| | |
| <p style="margin-left: 40px;">6.2.2 Re-entry analysis – advanced</p>
| |
| | |
| <p style="margin-left: 40px;">6.3.1 Medium/Long term hazard assessment – basic</p>
| |
| | |
| <p style="margin-left: 40px;">6.3.2 Medium/long term hazard assessment – advanced</p>
| |
| | |
| <p style="margin-left: 40px;">6.4.1 Medium/long term source characterisation – basic</p>
| |
| | |
| <p style="margin-left: 40px;">6.4.2 Medium/Long term source characterisation – advanced</p>
| |
| | |
| <p style="margin-left: 40px;">6.5.1 SGM interpolation – basic</p>
| |
| | |
| <p style="margin-left: 40px;">6.5.2 SGM interpolation – advanced</p>
| |
| | |
| <p>7. Measurement and observation trends for forensic analysis</p>
| |
| | |
| <p style="margin-left: 40px;">7.1.1 Forensic analysis triggered by large events or rockbursts – basic</p>
| |
| | |
| <p style="margin-left: 40px;">7.1.2 Forensic analysis triggered by large events or rockbursts– advanced</p>
| |
| | |
| <p style="margin-left: 40px;">7.2.1 Periodic reporting of trends – basic</p>
| |
| | |
| <p style="margin-left: 40px;">7.2.2 Periodic reporting of trends – advanced</p>
| |
| | |
| <p>8. Understanding and quantifying seismic hazard</p>
| |
| | |
| <p><strong>Control Measures</strong></p>
| |
| | |
| <p>9. Ground support</p>
| |
| | |
| <p style="margin-left: 40px;">9.1.1 Ground support – design for dynamic load – basic practices</p>
| |
| | |
| <p style="margin-left: 40px;">9.1.2 Ground support – design for dynamic load – advanced practices</p>
| |
| | |
| <p style="margin-left: 40px;">9.2.1 Ground support – performance evaluation – basic practices</p>
| |
| | |
| <p style="margin-left: 40px;">9.2.2 Ground support – performance evaluation – advanced practices</p>
| |
| | |
| <p><strong>Further comments</strong></p>
| |
| | |
| <p>10. Exposure</p>
| |
| | |
| <p style="margin-left: 40px;">10.1.1 Planned exclusion – basic</p>
| |
| | |
| <p style="margin-left: 40px;">10.1.2 Planned exclusion – advanced</p>
| |
| | |
| <p style="margin-left: 40px;">10.2.1 TARP exclusions – basic</p>
| |
| | |
| <p style="margin-left: 40px;">10.2.2 TARP exclusions – advanced</p>
| |
| | |
| <p style="margin-left: 40px;">10.3.1 Layout and timing – basic</p>
| |
| | |
| <p style="margin-left: 40px;">10.3.2 Layout and timing – advanced</p>
| |
| | |
| <p style="margin-left: 40px;">10.4.1 Remote equipment – basic</p>
| |
| | |
| <p style="margin-left: 40px;">10.4.2 Remote equipment – advanced</p>
| |
| | |
| <p style="margin-left: 40px;">10.5.1 Automated process – basic</p>
| |
| | |
| <p style="margin-left: 40px;">10.5.2 Automated process – advanced</p>
| |
| | |
| <p style="margin-left: 40px;">10.6.1 Communication and training – basic</p>
| |
| | |
| <p style="margin-left: 40px;">10.6.2 Communication and training – advanced</p>
| |
| | |
| <p>11. Mine design</p>
| |
| | |
| <p style="margin-left: 40px;">11.1.1 Pillar design – basic</p>
| |
| | |
| <p style="margin-left: 40px;">11.1.2 Pillar design – advanced</p>
| |
| | |
| <p style="margin-left: 40px;">11.2.1 Excavation design – basic</p>
| |
| | |
| <p style="margin-left: 40px;">11.2.2 Excavation design – advanced</p>
| |
| | |
| <p style="margin-left: 40px;">11.3.1 Extraction rate – basic</p>
| |
| | |
| <p style="margin-left: 40px;">11.3.2 Extraction rate – advanced</p>
| |
| | |
| <p style="margin-left: 40px;">11.4.1 Extraction sequence – basic</p>
| |
| | |
| <p style="margin-left: 40px;">11.4.2 Extraction sequence – advanced</p>
| |
| | |
| <p style="margin-left: 40px;">11.5.1 De-stress slot – basic</p>
| |
| | |
| <p style="margin-left: 40px;">11.5.2 De-stress slot – advanced</p>
| |
| | |
| <p style="margin-left: 40px;">11.6.2 Mining method – basic</p>
| |
| | |
| <p style="margin-left: 40px;">11.6.2 Mining method – advanced</p>
| |
| | |
| <p>12. Conditioning rock mass</p>
| |
| | |
| <p style="margin-left: 40px;">12.1.1 De-stress blasting – basic</p>
| |
| | |
| <p style="margin-left: 40px;">12.1.2 De-stress blasting – advanced</p>
| |
| | |
| <p style="margin-left: 40px;">12.2.1 Hydraulic fracturing – basic</p>
| |
| | |
| <p style="margin-left: 40px;">12.2.2 Hydraulic fracturing – advanced</p>
| |
| | |
| <p><strong>Seismic risk assessment</strong></p>
| |
| | |
| <p style="margin-left: 40px;">Risk Assessment</p>
| |
| | |
| <p style="margin-left: 80px;">The individual formal subjective risk assessment</p>
| |
| | |
| <p style="margin-left: 80px;">Formal subjective risk assessment employing expert opinion</p>
| |
| | |
| <p style="margin-left: 80px;">Quantitative risk assessment</p>
| |
| | |
| <p><strong>References</strong></p>
| |
| | |
| <p><strong>Recommended reading</strong></p>
| |
| | |
| | |
| [[File:SRMP Flowchart.jpeg]]
| |
| <b> Figure1: Seismic Risk Management Practices Flowchart </b>
| |